ACT360 Web & IT Inc.
Blog

Construction Project Management Software: The IT Requirements Behind Procore, Autodesk Build and Bluebeam

Procore, Autodesk Build and Bluebeam only work as well as the devices, internet, logins and data setup underneath them. Here are the IT requirements an Ontario contractor should check before rolling out or switching platforms.

Construction worker on site reviewing a drawing on a tablet, the kind of device construction project management software has to run on

QUICK ANSWER

Quick answer

Construction project management software needs current phones and tablets (iOS 17 or Android 13 and up for Procore and Autodesk Build), supported Windows 10 or 11 PCs for Bluebeam Revu, reliable site internet with drawings downloaded for offline use, a deliberate choice of data region, and single sign-on with clean offboarding.

KEY TAKEAWAYS

What to remember

  • Procore's iOS app needs iOS 17.1 or later and its Android app needs Android 13; older field tablets won't install current versions.
  • Bluebeam Revu 21 runs on 64-bit Windows 10 or 11 with 8 GB of RAM, and it isn't supported on Macs.
  • Autodesk lists a symmetrical 5 Mbps connection per machine as its minimum for burst transfers, so plan trailer internet around it.
  • Canadian data storage is available for Autodesk Build, Bluebeam Studio and Procore file storage, but Procore's application data zones are US, UK and EU only.
  • Connect each platform to Microsoft Entra ID or SAML single sign-on where your plan allows, so leaving staff lose access in one step.
  • Run a short IT checklist before rollout or a platform switch, and decide who owns users, devices and vendor tickets.
In this article
  1. What IT Does Construction Project Management Software Need?
  2. Which Devices Will Run It, and Which Won’t?
  3. How Much Internet Does a Site Trailer Need?
  4. Where Does Your Project Data Live?
  5. Logins, Single Sign-On and Seasonal Crews
  6. Don’t Forget the Accounting Side
  7. An IT Checklist Before You Roll Out or Switch Platforms
  8. Who Owns What: Your IT Provider, the Vendor or You?
  9. Final Thought

Procore, Autodesk Build and Bluebeam only work as well as the devices, internet, logins and data setup underneath them. Here are the IT requirements an Ontario contractor should check before rolling out or switching platforms.

TL;DR Construction project management software is cloud-based, but it still leans on your IT: phones and tablets new enough to run the current apps, Windows PCs that meet Bluebeam’s specs, site internet that can handle drawing sync, a data region you chose on purpose, and logins tied to one identity so people can be shut off cleanly.

When a superintendent says “Procore is slow” or “the drawings won’t open,” the platform isn’t always the problem. The cause is just as likely to be the tablet, the trailer connection, or a login nobody cleaned up. That’s why IT for construction companies has to include the project platforms, not just the office computers. Our guide to IT services for construction companies in Ontario covers the full scope; this post goes one level down, into what Procore, Autodesk Build and Bluebeam actually need from your IT.

I’m Jeffrey Bowles, Partner and Director of IT Services at ACT360. Every requirement below comes from the vendors’ own published documentation, checked in November 2026. Vendors change these often, so treat the numbers as a starting point and confirm them before you buy hardware.

What IT Does Construction Project Management Software Need?

Construction project management software needs supported browsers in the office, current phones and tablets in the field, Windows PCs that meet Bluebeam’s specs, enough site bandwidth to sync drawings, a chosen data region, and a single sign-on setup so access follows the person.

Here’s how Procore, Autodesk Build and Bluebeam compare on the IT side.

Requirement Procore Autodesk Build Bluebeam
Office access Web: Chrome, Firefox, Safari or Edge, JavaScript on Web: Chrome (recommended), Firefox, Safari or Edge; 64-bit browsers recommended Revu 21 desktop app on 64-bit Windows 10 or 11, 8 GB RAM, about 5 GB disk
Phones and tablets iOS 17.1 or later; Android 13 or later iOS and iPadOS 17.0 or later; Android 13.0 or later iOS 18 or later; Android 14 or later, 64-bit only
Working offline Download drawings to the device; offline changes sync later Sheets and files download to the device through project download options Revu needs an online sign-in, with a 30-day offline grace period
Canadian data storage Files can be stored in Canada; application data zones are US, UK and EU Canada is an available region for Build Studio has a Canadian region
Sign-in Single sign-on with Microsoft Entra ID, set up with your Procore contact SAML 2.0 single sign-on at the domain level Named-user sign-in with a Bluebeam ID

Sources: Procore support pages on browsers, iOS, Android and data storage; Autodesk’s system requirements and mobile app pages; Bluebeam’s Revu 21 requirements and web and mobile compatibility. Autodesk’s help pages now also use the name Autodesk Forma for parts of this product family.

Which Devices Will Run It, and Which Won’t?

Field devices need iOS 17 or Android 13 at minimum for Procore and Autodesk Build, and Bluebeam’s mobile and web app asks for iOS 18 or Android 14. Office PCs running Revu need 64-bit Windows 10 or 11, and Windows 10 is already past end of support.

The device question is easy to skip. Tablets bought for a project four or five years ago can’t always move to the OS version the current app requires, and nobody notices until the app stops updating.

  • Tablets in trucks. Check the OS version on every field device against the table above. Anything that can’t update gets replaced before rollout, not during a pour.
  • Office PCs for Revu. Revu 21 needs 64-bit Windows 10 or 11, a 1 GHz processor and 8 GB of RAM, and it installs .NET Framework 4.8 if the PC doesn’t already have it. Microsoft ended Windows 10 support on October 14, 2025, so new purchases should be Windows 11.
  • Macs are the awkward case. Revu isn’t supported on Mac. Bluebeam points Mac users to its web version, Windows 11 ARM in Parallels, or the iOS app on the Mac.
  • Every phone and tablet that holds drawings should be enrolled in Mobile Device Management, so a lost device can be locked or wiped from the office.

A device inventory with OS versions takes an afternoon and answers most of the “why won’t it open” calls before they happen.

How Much Internet Does a Site Trailer Need?

Autodesk publishes a minimum of a symmetrical 5 Mbps connection for each machine on burst transfers, with 10 and 25 Mbps as higher tiers. Procore doesn’t publish a bandwidth figure, so plan around the busiest moment: everyone syncing drawings at the start of the day.

Two things matter more than the headline speed on the plan.

  • Upload speed. The Autodesk figure is symmetrical, meaning upload as well as download. Photos, markups and daily logs all go up from the site, and rural and cellular plans can have far less upload than download.
  • Per machine, not per site. A trailer with a super, an assistant and two foremen all opening sheets at 7 a.m. is four machines bursting at once.

Offline download is the backup plan, not the main one. Procore’s iOS app lets you download drawings by discipline or one at a time, and offline changes sync once the device is back on a connection. Autodesk’s mobile app downloads sheets and files through its project download options and always pulls the latest version. Both work well when someone downloads the current set before heading out; neither helps if the tablet hasn’t seen a connection since last week’s revision.

Where Does Your Project Data Live?

It depends on the platform and on choices made when the account was set up. Autodesk Build and Bluebeam Studio offer Canadian regions, and Procore can store files in Canada while its application data sits in US, UK or EU zones.

  • Procore. Its file storage location, covering documents, photos and drawings, can be set to Canada. Its application zones are the United States, United Kingdom and European Union.
  • Autodesk Build. Autodesk lists Canada among the regions for Build, and it announced Canadian storage for Build, Takeoff and Estimate in November 2025. Older BIM 360 Docs projects are US or EU only.
  • Bluebeam Studio. Studio Sessions and Projects run in a chosen region, and Canada is one of them.

Why it matters: public-sector owners and some private clients write data location into contracts, and under PIPEDA your company stays accountable for personal information it hands to a service provider. Read your owner contracts before the account is created, and pick the region on purpose rather than accepting the default.

Logins, Single Sign-On and Seasonal Crews

Tie each platform to one company identity where your plan allows it. Procore supports single sign-on with Microsoft Entra ID, Autodesk supports SAML 2.0 single sign-on at the domain level, and Bluebeam Revu 21 uses named-user sign-in with a Bluebeam ID.

The reason is offboarding. A construction company adds and removes people every season, and every separate password is one more account to remember to close in November. With single sign-on, disabling the person in Microsoft 365 closes the door to the platform at the same time.

  • Procore. The Entra ID setup guide starts with a request to your Procore point of contact and needs an Entra Global Administrator on your side.
  • Autodesk. Single sign-on is set up for all users on your email domain; directory sync comes with Autodesk’s Business Success Plan.
  • Bluebeam Revu 21 requires named-user sign-in on Basics, Core or Complete plans, and users must sign in online at least every 30 days.

Pair single sign-on with multi-factor authentication on the Microsoft 365 side. Our MFA implementation guide covers the rollout without locking out the field.

Don’t Forget the Accounting Side

Project platforms usually live in the cloud, but job costing may still run on an office server, and that server has its own requirements. Check them before you connect the two or replace hardware.

  • Sage 300 Construction and Real Estate. It uses Actian Zen as its database. Version 26.2 and later needs Actian Zen 16, and from version 25.2 it’s compatible with Windows Server 2025 (Sage 300 CRE v26 notes).
  • Sage 100 Contractor. Version 2026.1 requires Microsoft SQL Server and .NET Framework 4.8, and Windows versions older than Windows 10 and Windows Server 2016 are no longer supported (2026.1 release notes).

The bigger decision is where accounting is heading. A 35-person painting contractor we work with was quoted $60,000 to replace a failing server; once its plan to move accounting off-premise was on the table, a $25,000 server sized to bridge to that move did the job. The details are in our painting contractor case study.

An IT Checklist Before You Roll Out or Switch Platforms

Before go-live, confirm devices, connections, region, logins and support ownership. These seven steps take days, not weeks, and they’re far cheaper than discovering a gap on a live job.

  1. List every phone, tablet and PC that will use the platform, with its OS version.
  2. Replace or retire devices below the vendor’s minimum before rollout day.
  3. Test site internet at a busy hour, and add a cellular backup where the line is weak.
  4. Read owner contracts for data location clauses, then choose the platform’s region.
  5. Connect single sign-on to Microsoft 365 and turn on multi-factor authentication.
  6. Write down how project files and job costing data are backed up and restored.
  7. Agree who adds users, handles device problems and opens vendor tickets.

The last step sounds like paperwork, but it decides whether a superintendent gets one phone call or three when something breaks.

Who Owns What: Your IT Provider, the Vendor or You?

Your IT provider owns the devices, network, identity and backups around the platform. The software vendor owns the platform itself. Your project team owns how the platform is used on each job.

Task Usually owned by
Tablets, phones and PCs, including Mobile Device Management IT provider
Office and trailer internet, Wi-Fi and firewalls IT provider
Single sign-on, MFA, adding and removing users IT provider, with HR or the project manager telling them who starts and leaves
Platform outages, bugs and feature changes Software vendor (your IT provider can open and chase the ticket)
Project templates, permissions by role, drawing workflow Your project team or platform admin
Which platform to buy, and when to refresh hardware Leadership, ideally with a vCIO

That last row is where a vCIO earns its place: someone who looks at the platform, the hardware it needs and the accounting plan together, and puts them on one technology roadmap. ACT360 supports Procore, Buildertrend, Autodesk Build and Bluebeam Revu users as part of our IT support for construction companies.

Final Thought

Project management software is only as good as the slowest device, weakest connection and messiest login around it. Check those three, choose your data region on purpose, and agree who owns what, and the platform gets to do its job.

Our free IT Readiness Assessment checks your devices, sites and accounts against what your platforms need and tells you what to fix first. If you want numbers by company size, see IT support costs for construction companies. You can also call 705-739-2281 or email [email protected].

FAQ

Questions Builders Ask About PM Software and IT

Will our older iPads and Android tablets still run Procore and Autodesk Build?

Only if they can update to iOS 17 (17.1 for Procore) or Android 13, which is what both vendors list as the minimum for their current apps. A tablet stuck on an older version can’t install the latest app. Check the OS version on every field device before rollout day, not after a superintendent can’t open the drawing set.

Can our site crews work in Procore with no signal?

Procore’s iOS app works offline for drawings you’ve downloaded first, by discipline or one sheet at a time, and changes made offline sync once the device is back on a connection. Download the current set before heading out, and make sure someone knows the device has to come back online for markups to reach the office.

So how much internet does a site trailer really need?

5 Mbps per machine, symmetrical, is Autodesk’s published minimum for burst transfers, with 10 and 25 Mbps as its higher tiers. Procore doesn’t publish a figure. Because that number is per machine, a trailer with four people syncing drawings at 7 a.m. needs a lot more than a single plan.

Does our project data have to leave Canada?

Project data can stay in Canada on Autodesk Build and Bluebeam Studio, which both offer a Canadian region, if that region is chosen when the account is set up. Procore can store files such as documents, photos and drawings in Canada, while its application data zones are the US, UK and EU. Check your owner contracts for data location clauses before the account is created.

Our estimator uses a Mac. Is Bluebeam off the table?

Not necessarily: Revu itself isn’t supported on Macs, but Bluebeam lists three workarounds: Bluebeam on the web, Windows 11 ARM in Parallels, or the iOS app running on the Mac. Which one fits depends on how heavily that person marks up drawings. For full takeoff work, a Windows machine is still the simpler answer.

Who should handle this setup if we don't have an IT person?

Your IT provider should own the devices, network, logins and data settings, while the software vendor owns its platform and your project team owns how it’s used on jobs. ACT360’s free IT Readiness Assessment checks your devices, sites and accounts against what your platforms need, then gives you a short list of what to fix before rollout.

KEEP READING

Related Posts

Read IT Services for Construction Companies in Ontario: What the Office, Sites and Trucks Need Site engineer with a tablet talking with a worker on an Ontario construction site, where IT services for construction companies have to reach

IT Services for Construction Companies in Ontario: What the Office, Sites and Trucks Need

IT services for an Ontario construction company have to reach the jobsite, the devices in the trucks and the project software in between. Here's what the work should cover, which rules touch it, and how to set up each new site.

Read Cybersecurity for Construction Companies: Protecting Sites, Devices and Payments Builder checking a tablet during a site inspection, a field device that construction cybersecurity has to protect

Cybersecurity for Construction Companies: Protecting Sites, Devices and Payments

Construction companies face payment fraud, ransomware and account takeovers through emails, shared logins, field devices and site Wi-Fi. Here's where attacks get in, what to fix first, and how to secure tablets and jobsite networks.