Construction companies face payment fraud, ransomware and account takeovers through emails, shared logins, field devices and site Wi-Fi. Here's where attacks get in, what to fix first, and how to secure tablets and jobsite networks.
TL;DR Construction companies get hit through the same doors as everyone else, but more of those doors are open: payment emails between owners, contractors and subs, shared logins on project platforms, tablets left in trucks and site Wi-Fi nobody manages. Lock down email and payments first, then accounts, devices and sites, and test that your backups restore.
Cybersecurity on a construction job used to mean a lock on the site trailer. Today the bigger risks sit in the trailer’s Wi-Fi, the superintendent’s tablet and the email asking you to send this month’s draw to a new bank account. This guide covers what attackers go after in a construction company and what to fix first. It sits under our cybersecurity services, and it’s part of how we support construction companies across Ontario.
I’m Jeffrey Bowles, Partner and Director of IT Services at ACT360. I lead our technical team, which means I’m usually the one looking at sign-in logs after something odd happens.
Why Are Construction Companies a Target for Cyber Attacks?
Construction companies move large payments on tight schedules, depend on many outside partners and run work across temporary sites and mobile devices. That combination gives attackers more ways in and more reasons to expect a payment, which is why ransomware and payment fraud both show up so often in the sector.
The Canadian Centre for Cyber Security’s National Cyber Threat Assessment 2025-2026 charts the increase in ransomware incidents it observed by sector from 2022 to 2023. Construction rose 133%, behind only IT and finance, and ahead of transportation, professional services, retail and healthcare.
Vendor research points the same way. Rapid7, a security vendor, ranked construction among the three most attacked sectors in 2025 for ransomware, with Canada the second most affected country after the United States. That’s one company’s view of its own data, so treat it as a signal, not a census.
Across all Canadian businesses, Statistics Canada reports that 16% were impacted by a cyber security incident in 2025, and scams and fraud were a method of attack for 55% of those impacted. StatCan doesn’t publish a construction-only figure in that release.
Where Do Attacks Get Into a Construction Company?
Most attacks on a builder start in one of seven places: payment and invoice emails, shared or reused logins, project platform accounts nobody removed, lost or unmanaged field devices, site Wi-Fi, an aging office server, and outside parties with access to your systems.
| Way in | What it looks like on a build | What closes it |
|---|---|---|
| Payment emails | A message from a sub or supplier with “new banking details” before a draw | Verify any banking change by phone, using a number you already had |
| Shared logins | One Procore or supplier portal login used by the whole site team | Named accounts for each person, with multi-factor authentication |
| Leftover accounts | Last season’s labourers can still sign in to email or the project platform | Offboarding the day someone leaves, checked monthly |
| Field devices | A tablet with drawings and email open, left in an unlocked truck | Mobile Device Management with a passcode, encryption and remote wipe |
| Site Wi-Fi | One password shared with every trade on site, never changed | Separate staff and guest networks, new passwords for each job |
| Old office server | Accounting on a server past its support date, rarely patched | Patching, monitoring, and a plan to replace or move it |
| Outside access | An estimating consultant or old IT provider who still has admin access | Review who has access to what, and remove what’s no longer needed |
Look down that middle column. If several of those rows describe your company right now, work through the next two sections before spending on anything fancier.
How Does Payment Fraud Hit a Contractor?
Payment fraud usually arrives as a convincing email that appears to come from a real subcontractor, supplier or client, asking you to send an upcoming payment to new bank details. If the change isn’t verified by phone, the money goes to the fraudster and is hard to recover.
The Canadian Anti-Fraud Centre describes this pattern on its page about frauds targeting businesses: a message that “may look like an email from existing contractor providing new payment directions and requesting payment of an invoice.” That sentence could have been written about construction. The RCMP’s business email compromise page notes almost $30 million in reported losses to this scam in 2020 and over $26 million in the first half of 2021 alone. Those figures are dated, and only cover what was reported.
Ontario’s prompt payment rules add time pressure. Under the Construction Act, an owner pays a proper invoice within 28 days, and a contractor pays its subcontractors within 7 days of being paid. Deadlines like that are exactly what a fraudster leans on: “we need this today or we can’t release the crew.”
We saw a version of this at an Ontario client with multiple locations (not a construction company). A business partner received an email asking for updated banking details for a six-figure EFT. It used a real employee’s name, referenced the real payment conversation, and came from a newly registered lookalike domain one letter off from the client’s. The partner paused and called to confirm. Our review of the client’s mailboxes and sign-ins found no breach: the attacker never got inside, they just imitated the company from outside. The full write-up is in our fraud investigation case study.
The lesson for a builder: you can’t stop someone from registering a lookalike domain. You can make sure nobody in your company, or your partners’, changes banking details based on an email alone.
What Should a Construction Company Fix First?
Start with the controls that block the most common attacks for the least effort: verify payment changes by phone, turn on multi-factor authentication everywhere, give everyone their own login, manage field devices, and prove your backups restore. Then tighten site Wi-Fi and outside access.
- Write a rule: no banking change is accepted by email alone, ever, for anyone.
- Turn on multi-factor authentication for email, the project platform and banking.
- Replace shared logins with named accounts, so you know who did what.
- Enrol every phone and tablet in Mobile Device Management with remote wipe.
- Test a restore of project files and accounting data, not just a backup report.
- Shut off accounts the day staff or seasonal crew leave, and check monthly.
- Give each jobsite separate staff and guest Wi-Fi with a fresh password.
Multi-factor authentication earns its spot near the top. Microsoft says that MFA plus blocking legacy sign-ins stops more than 99.9% of common identity-related attacks. Our MFA implementation guide covers how to roll it out to field staff without a week of lockouts.
How Do You Keep Field Devices and Site Networks Secure?
Treat every phone and tablet as something that will eventually be lost, and every jobsite network as temporary. Manage devices centrally so they can be locked or wiped, keep company data in company apps, and build each site network fresh, then take it down when the job ends.
A superintendent’s tablet often has more access than a desktop in the office: email, the project platform, drawings, photos of the site, sometimes the banking app. If it goes missing, the question isn’t whether it was expensive. It’s what someone could open with it.
- Passcode and encryption on every device, enforced centrally rather than requested politely.
- Remote lock and wipe, tested once so you know it works before you need it.
- Personal phones that open company email should keep work data in a separate, managed space.
- Site routers get changed default passwords and updates, and come back to the office when the job is done.
- Subcontractors use the guest network. Always.
The Cyber Centre’s baseline cyber security controls for small and medium organizations make a useful checklist here, built on getting most of the benefit from a small share of the effort.
What Monitoring Found at a Painting Contractor
When a 35-person commercial painting contractor with a related construction business came on board, identity monitoring flagged account access from three countries within weeks, none of which anyone at the company had seen before.
The company works across four locations in Ontario and Alberta, with crews and office staff signing in from all of them. Without monitoring, there’s no record of normal to compare against, so a sign-in that doesn’t belong looks like any other. You can read more about the company in our painting contractor case study, which focuses on how a $60,000 server quote became $25,000.
The takeaway is simple and a little uncomfortable. If nobody watches your sign-ins, you don’t know whether something like this is happening to you.
Final Thought
Cybersecurity for a construction company comes down to protecting the money, the accounts and the devices that leave the building. Get payment verification, MFA, device management and tested backups in place, and you’ve closed the doors attackers use most. For the people side, our guide to phishing awareness training helps staff spot the emails that slip through, and our ransomware recovery plan covers what to do if the worst happens.
If you’d like an outside look at where your company stands, our free IT Readiness Assessment reviews your office, sites and field devices and gives you a short, prioritized list. For the wider IT picture, see our guide to IT services for construction companies in Ontario. You can also call 705-739-2281 or email [email protected].